INCERTEC specializes in plating highly-engineered, critical components where knowledge, experience and ability matter most.
We use a FleXYZ which offers the latest in laser marking. The Electrox Rapid III is a 30W fiber laser that has various frequencies and pulse widths that allow it to remove regular and hard anodize coatings but also can make dark marks on stainless steel or deep etch into metals. The FleXYZ workstation incorporates a large marking area, programmable X,Y and Z-axis movements to address all types of parts. A rotary attachment can be implemented into the FleXYZ workstation to mark circular parts.
Process: Advanced Material Analysis Our advanced material analysis instruments set us apart in our ability to accurately and quickly inspect materials. Micro focus and proportional counter tubes are ideally suited for the inspection of parts where small structures are measured. Typical applications are measurements on pc-boards, plug contacts and other fine electrical components. The instrument is equipped with four interchangeable apertures and a programmable XY(Z) measuring stage. This makes it ideal for testing mass-production or long runs.
Process: X-Ray Analysis Our x-ray instrument with silicon PIN detectors provide analysis results and coating thickness readings even with small concentrations and very thin coatings. Fast and precise XY(Z) measuring stage makes it ideal for automated sample measurements.
Process: Magnetic Induction For a standard-conforming, non-destructive determination of ferrite content in austenitic welded products and in duplex steel. Ferrite content can be measured on site and quickly between 0.1 and 80% Fe.
Process: Eddy Current For the measurement of the electrical conductivity of non-ferrous metals or metals such as aluminum, copper and stainless steel. In addition, the hardness and strength of heat-treated materials as well as heat damage and metal fatigue can be determined.
Process: Non Destructive Testing - Fluorescent Penetrant Inspection Fluorescent penetrant inspection (FPI) is a type of dye penetrant inspection in which a fluorescent dye is applied to the surface of a non-porous material in order to detect defects that may compromise the integrity or quality of the part in question.
Other Tests
  • Inductive Coupled Plasma
  • Atomic Absorption
  • Destructive Testing (bend, cross-hatch)
  • Solderability
  • Taber Abrasion
  • Humidity
  • Porosity
  • Quench
  • Hardness
  • Adhesive
  • Tape Test
  • Salt Spray
For estimates please contact us Please call (763) 717-7016 x1201 for the following services: Extensive Masking Capabilities and testing procedures including Salt Spray, Porosity, Humidity and Solderability, Bend & Scrape.